I have a 69 dodge dart swinger 340 front disc brakes sbp wanting to change to lbp im wondering if the stock disc spindle will work on the new lbp set up I have the 73 upper control arm and large ball joint. I sure someone has ask this same question. Will my stock lower control arm work with the lbp im sure if this will work, never done a sbp/lbp before wanting to know what parts will work and what I need to buy.
69 dart disc brakes
- Thread starter dad69dds
- Start date
-
No, large bolt pattern, disc brake rotors from the A, B, E, body or F, M, J, body Do Not Work, Fit, on a 65-72 Kelsey Hayes, 4 piston caliper, disc brake spindle.
The "shaft" on the spindle is too small for that.
There is a vendor that machines early Mustang rotors to work with an early KH spindle, to go to big bolt pattern.
That's the only way it will work.
Lower control arm stays the same, doesn't have to be changed.
Just the lower ball joint to 73-76 A body ones, when changing the spindles.
The "shaft" on the spindle is too small for that.
There is a vendor that machines early Mustang rotors to work with an early KH spindle, to go to big bolt pattern.
That's the only way it will work.
Lower control arm stays the same, doesn't have to be changed.
Just the lower ball joint to 73-76 A body ones, when changing the spindles.
Last edited:
-
