[Found!] 69 Dart Torsion bar crossmember

[Scott_ 69HemiDart]

Looking for the torsion bar crossmember part for a ‘69 Dart 4 speed. The arrow in red is pointing to what I need. Let me know if anyone has anything available. Thank you

 

[MidnightSwinger]

Hey Scott, it’s called the torsion bar crossmember and amd has them if no one can help you out.

Auto Metal Direct 395-1067: Torsion Bar Crossmember 1967-76 Mopar A-Body - JEGS

 

[MidnightSwinger]

@MrBelvedere2 Might have it too

 

[Scott_ 69HemiDart]

Hey Scott, it’s called the torsion bar crossmember and amd has them if no one can help you out.

Auto Metal Direct 395-1067: Torsion Bar Crossmember 1967-76 Mopar A-Body - JEGS

Great thank you Jared!

 

[MidnightSwinger]

Great thank you Jared!

Any time man!

 

[MrBelvedere2]

I think the automatic and 4 speed crossmembers are the same, but i do have one out of a manual car i'm starting to cut up if you need it.

 

[MOPARMAGA]

I might have one also, I will look in the morning.
It's from a 68 4 speed I assume will be the same.

 

[Scott_ 69HemiDart]

I think the automatic and 4 speed crossmembers are the same, but i do have one out of a manual car i'm starting to cut up if you need it.

Thank you, I do need one.

 

[Scott_ 69HemiDart]

I might have one also, I will look in the morning.
It's from a 68 4 speed I assume will be the same.

Thanks

 

[Oldmanmopar]

They are different from 70 -76. The early 67 -69 use larger 1/2 inch bolts where as the 70 -76 use 3/8 bolts. If you put a later torsion bar complete cross member in you will need the trans mount cross member and the hardware for a 70-76.

 

[Scott_ 69HemiDart]

They are different from 70 -76. The early 67 -69 use larger 1/2 inch bolts where as the 70 -76 use 3/8 bolts. If you put a later torsion bar complete cross member in you will need the trans mount cross member and the hardware for a 70-76.

I want to replace it with same year if possible. My FIL modified the original for the B body transmission. I am just trying to fix that area

 

[Scott_ 69HemiDart]

If I can’t find a suitable replacement I will just fix the problem area with a metal brace welded in

 

[MOPARMAGA]

If I can’t find a suitable replacement I will just fix the problem area with a metal brace welded in

Oh jeez, I'm sorry I forgot to check this morning and sorry again because I don't have one.

 

[Scott_ 69HemiDart]

Oh jeez, I'm sorry I forgot to check this morning and sorry again because I don't have one.

All good, appreciate you checking

 

[grampscamp]

I have one. Bolts as well if needed