'69 Dodge Dart GTS

[Kegan B]

Street/Strip Car

340 .30 over, TRW pistons, stock crank, windage tray, Victor 340 intake, accel dizzy, 850 holley, M/T valve covers, hooker headers

 

[Kegan B]

It was bought in the early 70's as a shell. It was a original 340 4 speed car. It had a 70's paint job on it, it was pearl white and pearl green. When it was finished, it had a .30 318 with a 727 reverse valve body with a 8 3/4 rear, it was repainted maroon with silver down the sides. The car sat for a couple of years and has rust in the usual places.

 

[Kegan B]

more pics

 

[Old Tired Rebel]

Have you got the patches in?

 

[Kegan B]

Not yet a member is sending me the ones for my inner fenders then i'm making the other 3.

 

[Old Tired Rebel]

Very good. That Dart will really be nice when you are done with it.

 

[Robj]

What are your plans for her?

 

[Tony Fields]

Can't wait to see her finished Kegan.

You think maybe you can have her ready for the Sept.
Show downtown.

 

[Divenut]

I love the vintage pictures of her in action. Very cool.

Pat

 

[Kegan B]

What are your plans for her?

It's my first car so mostly street with some strip time

 

[Kegan B]

Can't wait to see her finished Kegan.

You think maybe you can have her ready for the Sept.
Show downtown.

It probably won't be painted but it would be primered by then.

 

[mullinax95]

A car with some history.....cool

 

[Kegan B]

Almost ready to patch the inner fenders and primer them

 

[Old Tired Rebel]

Take lots of pictures.

 

[Kegan B]

Getting ready to go finish removing the 3 gallon fuel cell and brackets and get ready to put the new 12 gallon one in.

 

[69DARTS]

very cool

 

[Kegan B]

Found the fendertag today! Its a F8 car, black interior, black stripe.

 

[Kegan B]

V8X=Transverse Black Stripe
J25=Variable Speed Wipers
M21=Roof Drip Rail Moldings
M25=Wide Sill Moldings
N85=Console Mounted Tachometer
R11= Solid State AM Radio (2 watts)
V1F=Full Vinyl Top (Green)
AO1=Dart Light Group
B41=Front Disk Brakes
C16=Console with Woodgrain panel
C55=Bucket Seats
G11=Tinted Glass (all)
G33=Left outside remote mirror
F8=Dark Green Met
P6X=Premium Black Vinyl Seats
X9=Black Interior Door Frames
A25=October 25, 1968 Build Date
105986=Order Number
E55=340 4bbl
D21=833 4 speed
LS23=Dodge Dart, Special, 2 Door Hardtop
P9B= 340 275HP 1-4BBL V8 1969 Dodge Main Hamtramck, MI, USA

 

[Old Tired Rebel]

I hope you restore it kegan, that will be a super nice car when you are finished.

 

[HemiMark]

How sweet is this! very cool.... Dude, buy a camera! LOL

 

[Kegan B]

I hope you restore it kegan, that will be a super nice car when you are finished.

Thanks Cliff ! I just need to remedy some metal and it will be stock found inner fenders, need trunk floor, wheel tubs and quarter patches later I'll cut out the roll cage and put factory seats in it will have factory paint not sure on roof yet.

 

[Old Tired Rebel]

Thanks Cliff ! I just need to remedy some metal and it will be stock found inner fenders, need trunk floor, wheel tubs and quarter patches later I'll cut out the roll cage and put factory seats in it will have factory paint not sure on roof yet.

You're lucky kegan. AMD has everything you need. I know it will be slow but don't give up on it.

 

[Kegan B]

How sweet is this! very cool.... Dude, buy a camera! LOL

I have 2 but keep forgeting to take pics until after I've finished something

:sign3:

 

[George R]

I would "restore it" to the way it was in the picture when parked in front of that dealership in the dark red.
That car was badass in it's day.......and can be again.
Good Luck!!

George

 

[Kegan B]

Started rebuilding the carb, may have found an 833. Do I need a aluminum or steel bell housing ?