[WANTED] 7.25 Rear End Parts

-
Status
Not open for further replies.
GreyWizard said:
Bug? What bug? I can quit any time. :) :steering:
Click to expand...
Just my 2 cents opinion but most guys upgrade to a 8 1/4 or 8 3/4 rear axle complete from a donor car and turf the 7.25 rear if you plan on working it harder, better reliability and strength just a thought...………:rolleyes:
 
sabre67 said:
Just my 2 cents opinion but most guys upgrade to a 8 1/4 or 8 3/4 rear axle complete from a donor car and turf the 7.25 rear if you plan on working it harder, better reliability and strength just a thought...………:rolleyes:
Click to expand...

That may be in the future. For now however, I was guessing there would be some idle 7.25 parts out there as a result of those upgrades.
 
I'v got 3.23 ring and pinion but not the SureGrip
 
I had two sure grips there still around but get scraped not even knowing they are, just buy a ring and pinion 3.23 or 3.55 and have some one set it up, but if you want to upgrade on the cheap to a 83/4 get an early b body one and just change the offset of the rear rims I had this in a early dart saved some money big time
 
Might want to make sure you dont have one of these, the '66 Cuda Dany has been bracket racing does.
It's on the list to replace before the magnum swap if it doesn't POP first!!!
20180818_120438.jpg
 
Status
Not open for further replies.
-

Back
Top