[FOR FREE] 70-72 Demon/Dart hood

[4fortyDemon]

This came on my 71 demon project. It's relatively straight. A small rust spot on the drivers area where the hinge bolts up.
The majority of the innerstructure was cut out, I assume to 'lighten' the hood?
Hole was cut previously and then as an added bonus, ( sarcasm) a piece of metal was welded in to make the hole smaller.
$5
FREE!!!
Located in St George Utah

 

[4fortyDemon]

Decided to just give it away. I'll be going to MATS next month in Vegas.

 

[sawdoff]

I could use part of the inner structure if no one needs it and you're willing to cut and ship which I'd cover costs. Thnx

 

[4fortyDemon]

I could use part of the inner structure if no one needs it and you're willing to cut and ship which I'd cover costs. Thnx

Not being rude, but did you see the underside? Almost all of the bracing is cut out.

 

[crackedback]

Can it travel nice on the roof of a car?

 

[4fortyDemon]

Oh stfu! lololol

 

[crackedback]

Oh stfu! lololol

 

[sawdoff]

I'm only thinking of the areas around the hinges. From the cowl forward maybe 16 inches. Worst case I could use that as a pattern to fab some before I cut my original hood. I have a couple nice hoods but would like to leaving the matching patina original since not planning to paint this car