[SOLD] 70 dart swinger parts

[Sedanman]

I'm parting out this rust bucket 70 dart swinger /6,auto,a/c,ps,black bench interior,drum. The only good exterior parts are, trunk lid with wing cut outs,bumpers,doors,glass,trim,side markers,hinges.

body side moulding set (mid body) have 5 out of 6 pcs,missing ds fender pc $75

door top and 1/4 window chrome trim with corner bezels $100

vinyl top trim complete $50

outter rear window trim $75 interior $40 with screws

roof rail trim $40 both sides

a pillar $40pr

windshield trim $75

drip rail trim $100

bumper jack assy,wrong hook for 67-9 dart/valiant $60 with hold down bolt and bezel

rear bumper assy (driver) $100

Front bumper $50

dodge hood emblem,trunk emblem and 1/4 dart swinger emblems (driver) $40

retractable antenna assy,missing nut $30

rear red side markers $25 pr

wiper arms $20

windshield (tint) $50

rear $25

rear 1/4 glass $25ea reg's and tracks with hardware $25ea

nice doors with glass,wing window assy's no reg's

engine harness $50

dash harness $50

rear $25 $100 for all 3 harnesses

front valence $40

rear $40

hood lock support bracket $25

roof (offer)

repairable grill with PS bezel

 

[Sedanman]

mo pics

 

[72Swinger340]

PM sent on emblems

 

[Sedanman]

I am thinking of hitting the nats,but not sure yet

 

[mccoymail]

pm sent

 

[Sedanman]

replied

 

[A68DART360]

if emblems are avail and are they the same for a 71 swinger

 

[Sedanman]

The hood emblem has 4 tabs and the trunk has 2,swingers have 4

 

[71Scamper]

Sending PM

 

[Sedanman]

replied

 

[bighammer]

P.m. sent

 

[Sedanman]

replied

 

[bighammer]

Bottom pic with wing nut, is that a spare tire hold down? Interested, add to my quote plz.

 

[72Swinger340]

Sent you a PM on the Emblems the other day as per post # 3, Looking for shipping price to Saskatoon SK S7L7K7

 

[Sedanman]

I'm heading to the post office on monday to get some Canadien quotes

 

[Sedanman]

I am taking most everything to the Nat's next weekend that doesn't sell by Wed and can deliver parts you want prepaid and will hold them at my spot

 

[Sedanman]

Front valence junk,rear nice,front glass,rear 1/4 ext's,rear glass int trim,column,wheel,trunk lid,bumper all decent. I'm going back to finish her off tomorrow. Grill,front bumper,ps set up /6,front seat,seat belts,doors,rear 1/4 glass and reg's,rad and shroud with fan,spacer and pulley and possibly the rubber floor mat.

 

[Cal_gecko]

If you still have these, I want them!!!!

http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=1714643403&stc=1&d=1375337360

 

[RR70]

I'm parting out this rust bucket 70 dart swinger /6,auto,a/c,ps,black bench interior,drum. The only good exterior parts are, trunk lid with wing cut outs,bumpers,doors,glass,trim,side markers,hinges.

body side moulding set (mid body) have 5 out of 6 pcs,missing ds fender pc $75

door top and 1/4 window chrome trim with corner bezels $100

vinyl top trim complete $50

outter rear window trim $75 interior $40 with screws

roof rail trim $40 both sides

a pillar $40pr

windshield trim $75

drip rail trim $100

bumper jack assy,wrong hook for 67-9 dart/valiant $60 with hold down bolt and bezel

rear bumper assy (driver) $100

Front bumper $50

dodge hood emblem,trunk emblem and 1/4 dart swinger emblems (driver) $40

retractable antenna assy,missing nut $30

rear red side markers $25 pr

wiper arms $20

windshield (tint) $50

rear $25

rear 1/4 glass $25ea reg's and tracks with hardware $25ea

nice doors with glass,wing window assy's no reg's

engine harness $50

dash harness $50

rear $25 $100 for all 3 harnesses

front valence $40

rear $40

hood lock support bracket $25

roof (offer)

repairable grill with PS bezel

Any pix of the grille???

 

[340joe]

do you still have the seatbelts

 

[hoop]

How's the windshield trim. any dings?

 

[zrxslider]

Is the roof rail trim you mentioned, the channel the seal is attached to above the windows? Thanks

 

[Sedanman]

A bunch of stuff sold at the nat's and have to reinventory everything. I do have the rear valence,all side glass for an a/c car (tint),Black column with key and matching door locks,vinyl top trim,wiring harnesses,winshield,left rear 1/4 window reg,trunk lid,1/4 ext's,front bumper,jack assy just off the top of my head. The seat belts sold and will have to check on the winshield trim.

 

[Cal_gecko]

A bunch of stuff sold at the nat's and have to reinventory everything. I do have the rear valence,all side glass for an a/c car (tint),Black column with key and matching door locks,vinyl top trim,wiring harnesses,winshield,left rear 1/4 window reg,trunk lid,1/4 ext's,front bumper,jack assy just off the top of my head. The seat belts sold and will have to check on the winshield trim.

I am still interested in those little corner pieces that go on the inside edge/corner of the quarterpanel window, as shown in the photo you posted - the two small pieces in your hand.

these:
http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=1714643403&stc=1&d=1375337360

 

[Sedanman]

I'm not splitting up the set,sorry