70 Duster rallye dash electrical question

-

ijg4503

Well-Known Member
Joined
Dec 19, 2008
Messages
82
Reaction score
0
Location
Peachtree City, GA
Hello,

I seem to have a problem with all the speedo and tach lights working. I am not sure if it is a bad printed circuit board or something else. Half the bulbs work (left side) on the speedo. Any advice would be much appreciated. I also need 4 replacement bilb sockets for the 194A bulbs.

Let me know.

Thanks,

ijg4503
614-946-3333
jgalaske@comcast.net
 
After I got rid of the printed circuit board in my 65 I didn't have any more annoying electrical issues. I spent hours chasing those little annoying electrical gremlins. I just made my own wiring.
 
The rallye panel has 2 circuit boards and a harness connecter for each. The smaller board has only 3 wires going to it. One of those is for the one illumination bulb on that side of the panel. There aren't many so they all need to work. The bulb sockets can be found at NAPA store. More than one size
so take a sample with you.
 
-
Back
Top