70 Plymouth Duster aka the sickness

[eddieH]

Hello mopar friends.
Looking for some help. I can’t find the thread it was on.
I am build a 70 duster with a 6.1 hemi/ nag 1 swap.
My starter is on the right hand side
I read in a previous thread. The idler arm will hit the starter.( can’t find the thread). But the problem was solved with a spacer for the starter. And a new shaft for the starter drive.
I am using the original k member and holly mounts as it moves the engine forward an inch and a bit.
Or has someone else done this Any help on this would be greatly appreciated

 

[DionR]

Is this the post you are looking for?

TR6060 and TB suspension? Any info on the starter interference?

Do you know if anyone is running those mounts on an A-body at all? I'm just thinking that there's going to be very little room for fans and pulleys up front. On a B/E the radiator clearance is a whole different ball game. I don't. Valid concern. Just went out and took some quick measurements...

www.forabodiesonly.com

If you are running a NAG1, seems like the easy fix is a different bellhousing for an AWD LX car. Pretty sure Holley has part numbers and such in their instructions.

 

[DionR]

Found it in the header instructions - https://documents.holley.com/199r12216.pdf