71 Dart Bucket Seat Floorpan Hole Spacing

[RRD]

Can anyone provide the hole to hole spacing on the passenger side bucket seat holes for a 71 Dart. The outboard dimples are there. I need the 2 dimensions from the outboard hole to the inboard hole. Also the front to rear dimension on the inboard holes. Thanks.

 

[MoparMike1974]

There should be dimples for the inside holes also.
Stick some body plugs in the old holes for the bench seat to keep water out.

 

[RRD]

The inboard part of the passenger floor was gone and I had to repair it. So that is why I’m asking for the dimensions from the outer holes.

 

[missing linc]

Assuming that you have the seats that you intend to install, measure the distance between the studs, and drill accordingly. I had 2 sets of buckets but unfortunately I have sold all of them, otherwise I would measure them.

 

[RRD]

I have the seats but not the tracks. If anyone could measure their seats with tracks, that would help.

 

[OneOfMany]

72 Demon buckets. Same as 70 & 71. Spacing is a 12" square. 12" front to back, both sides. 12" left to right, both front and back.

Grant