Belvedere66
Well-Known Member
Hey guys, bought my Dart off this site about 6 months ago and slowly fixing things here and there. My recent project is fixing a steering fluid leak by replacing the worm gear upper seal. I was not wanting to remove the box since everything else seems to be fine. My issue is that I can't find a good way to get the old seal out. I've tried a sharpened coat hanger, a dental pick, misc other things I could get to fit.....nothing has been strong enough to pry it out. I have the column lifted out and out of the way.
On another note I had just put in a new sure grip 3.23 rear end and not only did this start leaking but the rear brakes stopped adjusting and my heater core decided to drip all over my passenger floor.....hahaha :cheers:...but that is down the road.
On another note I had just put in a new sure grip 3.23 rear end and not only did this start leaking but the rear brakes stopped adjusting and my heater core decided to drip all over my passenger floor.....hahaha :cheers:...but that is down the road.
