WyKev
Well-Known Member
I've been collecting parts for this project for 2-3 yrs now and just when I thought I was going to start----- Life thru a wrench in the works. Here is a list of what I have. Right now, I'm not splitting it up, want it to go as a package. Lowered price goes till Aug 1st, then I guess I'll make it run and move it.
Car is in Torrington , Wyoming
‘71 Dodge Swinger - V8/Auto Car, AC car, California car - 2 small spots on rockers, straight car - all trim and body parts. 8 ¾ rear end - no chunk, no engine in car, clear title
Body parts - spare trunk lid, hood, rear bumper. 6 pak scoop, duck bill spoiler, Go Wing
Mechanical parts - 70 340 engine - new hi volume oil pump, new brass freeze plugs, stock and Edelbrock intakes.
2 cams - Mopar purple shaft 484-284 rough idle
Speed Pro CS - 1143 - R
Rebuilt carter carb, chrome Moroso valve covers
‘79 360 engine with 180K, bolted to 727 with 20 K. Very good trans.
Have # matching 727 for ‘70 340 - was good when last driven
A833 4 speed with small block bell housing, correct flywheel for 340, trans hump, pedals
‘73 plus spindles, disc, brackets, UCA etc. to convert to 4.5 x 5 bolt pattern
8 ¾ rear end from Duster - 4.5 x 5 bolt pattern, 5:13 Sure Grip or spool, 742 chunk
‘68 E body 12 ? X 2” rear drums and backing plates - better stopping
Mopar spring relocate kit
complete A/C system that is missing in the swinger
Black dash cap
Factory Repair Manual
Audi leather bucket seats
AAR style rear spoiler for Duster
Lots of misc interior parts - wing windows, visors, handles, etc.
Asking 4,000.00 for it all. Ask questions! Now $3000.00
Car is in Torrington , Wyoming
‘71 Dodge Swinger - V8/Auto Car, AC car, California car - 2 small spots on rockers, straight car - all trim and body parts. 8 ¾ rear end - no chunk, no engine in car, clear title
Body parts - spare trunk lid, hood, rear bumper. 6 pak scoop, duck bill spoiler, Go Wing
Mechanical parts - 70 340 engine - new hi volume oil pump, new brass freeze plugs, stock and Edelbrock intakes.
2 cams - Mopar purple shaft 484-284 rough idle
Speed Pro CS - 1143 - R
Rebuilt carter carb, chrome Moroso valve covers
‘79 360 engine with 180K, bolted to 727 with 20 K. Very good trans.
Have # matching 727 for ‘70 340 - was good when last driven
A833 4 speed with small block bell housing, correct flywheel for 340, trans hump, pedals
‘73 plus spindles, disc, brackets, UCA etc. to convert to 4.5 x 5 bolt pattern
8 ¾ rear end from Duster - 4.5 x 5 bolt pattern, 5:13 Sure Grip or spool, 742 chunk
‘68 E body 12 ? X 2” rear drums and backing plates - better stopping
Mopar spring relocate kit
complete A/C system that is missing in the swinger
Black dash cap
Factory Repair Manual
Audi leather bucket seats
AAR style rear spoiler for Duster
Lots of misc interior parts - wing windows, visors, handles, etc.
Asking 4,000.00 for it all. Ask questions! Now $3000.00
