[SOLD] 72 340 Standard bore with fresh heads

-
Status
Not open for further replies.

Jim Ward

FABO Gold Member
FABO Gold Member
Joined
Apr 16, 2020
Messages
728
Reaction score
850
Location
Rockford MI
Rating - 100%
21   0   0
Contact seller
I have this early 72 cast crank 340 for sale. I disassembled the motor for inspection and it is very clean. .020 would likely clean it up. Included is a very low mile comp Xrtreme energy hydraulic flat tappet cam with lifters all marked to where they go. A nearly new weiand action plus intake unmolested. The heads are fresh with 1.88/160 valves. I ran this top end on my 360 last season and it went high 13’s at 101mph. $2500 located in west Michigan 49341. Prefer local pick up and cash. I can remove the heads for a photo of the bores for a serious buyer, I did grease them to prevent any corrosion.

040A9C0E-00A1-4302-8ABC-1D8C76CEDAB1.jpeg


98D6227C-DF5A-4A01-A0D2-8E1A5C97565E.jpeg


F1D0B34B-93CC-4B8D-BE5C-9BF65E9206BD.jpeg


ACDC5163-7252-4BBC-8BC8-2B6DDB3E09CB.jpeg


4EBA83B2-1EFE-4FFC-BCDE-D60CE2E892AE.jpeg


C603B2C6-BF4C-44A5-A4AD-3904473CDBD3.jpeg


9B59727D-B70B-4228-AF05-463EA437A83F.jpeg
 
2B443436. I’m going to go out on a limb here and say that’s not the VIN you were looking for?

D6D15E14-6A8D-4470-8A94-4E36F5FCB111.jpeg
 
Is there anything that can be deciphered from that partial VIN? What kind of car this motor came out of?
 
More photos of condition of bores and heads. Intake is a Weiand Stealth not action plus.

F0978E89-FE05-4837-BD22-1DA057975844.jpeg


366C6129-677F-46BC-9634-2A62A0114370.jpeg


E97F8F25-7F47-45B9-90A3-9C8570D1B20B.jpeg


9B7DED7E-FDFC-4AEE-828B-48FBBA73B5F3.jpeg


3AB6A7F5-624E-432C-B39B-9B48891F05C5.jpeg


A5A013EA-1F78-4A9C-997E-041750B46E31.jpeg
 
Status
Not open for further replies.
-
Back
Top