72 down front clip swap

[1973dusterkid]

Ok so I have a 1973 Duster I just bought a 1971 parts Duster.
What are all the parts will I need to swap the front clip of the car to a flat nose.

I have the

Doors
Fenders
Hood
Bumper mounts
Hoot latch assembley

I know I will need a grill and a Bumper what else will I need.

 

[cascius]

Doors are the same on the outside so if yours are solid there's no need to change them. You're on the right track with the other parts listed. You'll have to modify your wiring harness as the light sockets are different in the '71. You'll also need the filler panel under the grill behind the bumper. I'm in the process of doing this on my '74 right now and has been pretty straight forward so far.

 

[1973dusterkid]

Doors are the same on the outside so if yours are solid there's no need to change them. You're on the right track with the other parts listed. You'll have to modify your wiring harness as the light sockets are different in the '71. You'll also need the filler panel under the grill behind the bumper. I'm in the process of doing this on my '74 right now and has been pretty straight forward so far.

I have the filler panel to.
The door on this car are
very stright and look good.