They are all different for 2bbl and 4bbl. The flat is clocked different and they are different in length and the hole size diameter for the rod is different. This was done so not to mix the wrong part. I have two boxes with hundreds of kick down and shifter linkage including floor shift parts. These were kept from any car i ever stripped since 73. I know small block stuff by eye .
The big block stuff was to long ago so I don't know what went to what. If you can get a pic to me before these boxes get tossed I may have what you need. I have been going through some of these boxes and throwing away everything that will not fit my demon. My Demon is 4spd. and my duster has a reverse manual valve body. So these parts are useless to me .
I have offered to sell it all just to get it a new home. After being stood up by many of the Conneticut members who I believe are all the same person. I started scrapping all of the parts That are not needed for the Demon. and are now cluttering the shop. Get me a pic. or come and buy the boxes before they are gone. If you are from conneticut I will scrap it first. So Dave from Conneticut don't bother.