727 line pressure > 1300 H.P.

[69MOPE]

What line pressure are you 8 second 1/4 mile racers running in you 727?

 

[805moparkid]

1 million pounds! Bwhaaa

 

[oldkimmer]

.................With that much hp were not running a 727.........kim.......

 

[RustyRatRod]

That's turbo 400 territory.

 

[wesw]

sorry, pulled the 727 years ago and installed a glide. I will never use a 727 again.

 

[Abodybomber]

X2 on Turbo 400 or Glide. Jesus, what is your mill?

 

[Woods74]

I call BS on 1300HP.

 

[bOb shingler]

i don't know what it is but there is a turbo action "cheetah" valve body in my 727, what ever that pressure is.

 

[805moparkid]

i don't know what it is but there is a turbo action "cheetah" valve body in my 727, what ever that pressure is.

same one I have in my 904. I don't know if you can turn up the wick or not as that would be a cheap way to ensure you have more holding power.

 

[805moparkid]

I call BS on 1300HP.

why? These big inch small blocks do it often and the big in BB even more, that's NA, then add a power adder like the bottle or blow and that will be a moderate build...

 

[wheelsup73]

You need 200 lbs in low gear.

 

[69MOPE]

I call BS on 1300HP.

528 Indy aluminum, 12 1/2 to 1 , roller cam and rockers, 1050 dominator, extensive port work and 400 fogger.

 

[69MOPE]

You need 200 lbs in low gear.

Thank you

 

[805moparkid]

528 Indy aluminum, 12 1/2 to 1 , roller cam and rockers, 1050 dominator, extensive port work and 400 fogger.

what rpm you looking to turn? we built a nice 528 that made 773hp at 6600, but we were running a mag crossram and just some smoothing on the Stage V heads.

 

[69MOPE]

what rpm you looking to turn? we built a nice 528 that made 773hp at 6600, but we were running a mag crossram and just some smoothing on the Stage V heads.

6500 tops.

 

[805moparkid]

6500 tops.

should live for a long time then as long as your safe on the bottle! have you pulled apart that motor yet and made sure everything is how it should be? (assuming its indy built)

 

[A body]

You need 200 lbs in low gear.

we ran that in a friends 8.87 N/A 440-1 combo, but it was only a bit over 900hp. That was a fully rollerized Lofgren trans utilizing a TranzAct brake non LBA. 14x32 slick and would launch like a rocket. 2600lb weight.

 

[805moparkid]

we ran that in a friends 8.87 N/A 440-1 combo, but it was only a bit over 900hp. That was a fully rollerized Lofgren trans utilizing a TranzAct brake non LBA. 14x32 slick and would launch like a rocket. 2600lb weight.

couldn't be a red coronet would it? and being an Az guy you have me curious as to who you are!