Rapid Robert
Well-Known Member
dia & thread pitch. I see 7/16-20 & 7/16-24, both 11/16" long . thank you for your time. RR
73 dart discs: caliper banjo bolt size
- Thread starter Rapid Robert
- Start date
-
E7polyhachett
Well-Known Member
E7polyhachett
Well-Known Member
On my old metal SAE bolt diameter x thread size chart it says:
7/16 x 14 coarse thread SAE
7/16 × 20 fine thread SAE
If you have a thread pitch gauge, you may be able to fit into the hole to check the threads with a flashlight to see what your viewing. As far as a number 24 thread, nothing 1/2" but I am pretty sure there was a 24 thread on the 9/16" diameter, but it would not be that size.
7/16 x 14 coarse thread SAE
7/16 × 20 fine thread SAE
If you have a thread pitch gauge, you may be able to fit into the hole to check the threads with a flashlight to see what your viewing. As far as a number 24 thread, nothing 1/2" but I am pretty sure there was a 24 thread on the 9/16" diameter, but it would not be that size.
It's 7/16 x 20
Rapid Robert
Well-Known Member
thank you! RR
72Dart6pack
Harder Better Faster Stronger.
Be careful what copper washers you use. The ones that come with new banjo bolts are thin.
Rapid Robert
Well-Known Member
Noted, appreciated! RR EDIT I ordered the bolts & the washers that come with em even in the pic look very thin so I will source some thicker ones.
Last edited:
Ah, the crooked seller 72Dart6pack. Sold me an OER radiator for my '72 Dart, that didn't come close to fitment and also had holes punched into the cores from trying to fit a shroud. Wouldn't respond to me, I lost $500.
Last edited:
-
