[WANTED] 73+ front sway bar

[Elmer-FN-Fudd]

Looking for the sway bar and associated parts that are needed to put on my car. this is for a 71 duster with 73+ K member. It already has the correct factory 73+ lower control arms with tabs for the sway bar.

 

[66Valiant528]

I've got an Addco but it's for a car without factory swaybar tabs. Don't know if it'll work with the factory set up. It is fat and goes through the 73 K frame.

 

[junkyardhero]

do you need just the bar, or do you need the brackets too?

 

[Elmer-FN-Fudd]

I would need all the parts to install, my lower control arms have the factory tabs already, so yes I would need the brackets and end links.

 

[junkyardhero]

gotcha. i'll have a look around. i know i have the bar but i'll need to dig for the other bits.

 

[Elmer-FN-Fudd]

that would be great @junkyardhero, would definitely be easier to get all the pieces together. I would assume that I would need to get new bushings but that won't be a problem.

@66Valiant528 is the Addco bar the one that attaches to the lower shock mount?

 

[66Valiant528]

I believe the 90° bracket for the end link can be mounted to the shock bolt. I have the complete set up but dont know if it will work with your factory tabs. Also have an Addco rear sway bar set up from our 73.

 

[413]

Mopar Performance 1" bar new

[FOR SALE] - Mopar perf front sway bar kit 1" diameter P4286702 73-76

 

[Elmer-FN-Fudd]

found your ads, just waiting on junkyardhero

 

[413]

I believe the 90° bracket for the end link can be mounted to the shock bolt. I have the complete set up but dont know if it will work with your factory tabs. Also have an Addco rear sway bar set up from our 73.

Not for a 73-76, the bracket is in the center of the arm, not on end by shock bolt.

 

[66Valiant528]

It was on my some 73 Duster and I just don't recall as that car has been gone for 5 years now. But it was an Addco kit for that application and we had no control arm tabs. May be longer than a factory bar. Don't know. I can measure it if anyone needs me to.

 

[blewbyu]

pm sent