[Found!] 74 Duster 318/940 2bb Kickdown linkage

[360Duster75]

Putting my car back together from previous owner and noticed half of my kickdown is missing. So I am looking for a cheapo kick down linkage for my 74 Duster with a 2bb 318/904. Doesnt need to look nice just needs to function well enough to drive the car into my garage before I take leave. Im located in Fort Irwin, CA outside of Barstow. Can pick up or pay shipping.

 

[krazykuda]

@straightlinespeed

has a complete earlier style kick down and brackets, but it will work on your car if you use all of it together...

 

[Slantsix64]

what parts are you missing, i have 68 318 kickdown parts missing carb piece

 

[oldkimmer]

I have lots of pieces also. Kim

 

[360Duster75]

I have lots of pieces also. Kim

Im missing the part that goes to the transmission. I have the mount and part that goes into the TB, and the long one that drops down.

 

[oldkimmer]

So u need the torque shaft bracket and rod? Kim

 

[360Duster75]

Yes i belive that is it.

 

[oldkimmer]

Both pieces or just the 1 u need? Kim

 

[oldkimmer]

So u need the torque shaft bracket and rod? Kim

Sorry, I was thinking for a consol. Do u have the swivel and bolt that screws into the tranny case? Then u also need the rod from it to the lever on the tranny? 904 tranny? Kim

 

[oldkimmer]

Is this what u need? Kim

 

[360Duster75]

Is this what u need? Kim

View attachment 1715597028

Ill go grab mine out of the garage today to make sure that is it.

 

[360Duster75]

Is this what u need? Kim

View attachment 1715597028

So i have that part i found the rest of the kickdown in a box minus the lever that goes on the shift thing on the transmission itself.

 

[oldkimmer]

So u need the swivel and rod or? Kim

 

[360Duster75]

So u need the swivel and rod or? Kim

The swivel i have everything else from what i can tell.

 

[oldkimmer]

The down rod measures 5/16 at the swivel end. Does the rod from the tranny measure 5/16 or 1/4 at swivel end? Kim

 

[360Duster75]

The down rod measures 5/16 at the swivel end. Does the rod from the tranny measure 5/16 or 1/4 at swivel end? Kim

Ill have to double check i want to say 5/16

 

[oldkimmer]

Lmk. Kim