oregonhd big daddy John Joined Jan 29, 2011 Messages 62 Reaction score 0 Location Dayton oregon Jul 4, 2011 #1 on the 75 k member the sway bar feeds through the k member, does the arched middle section face up or down? in the k member? thanks
on the 75 k member the sway bar feeds through the k member, does the arched middle section face up or down? in the k member? thanks
340-4spd Well-Known Member Joined Oct 28, 2010 Messages 305 Reaction score 21 Location Out West Jul 4, 2011 #2 I'm thinking up, but not sure, and not home right now to look.
clhyer Well-Known Member Joined Feb 24, 2007 Messages 3,734 Reaction score 320 Jul 4, 2011 #3 Mine is installed dipping down. It looks like there could be some interference if it were installed "up". C
Mine is installed dipping down. It looks like there could be some interference if it were installed "up". C
340-4spd Well-Known Member Joined Oct 28, 2010 Messages 305 Reaction score 21 Location Out West Jul 5, 2011 #4 I can't tell by looking at it, but mine's an Addco aftermarket bar, so may be different than the one you are talking about.
I can't tell by looking at it, but mine's an Addco aftermarket bar, so may be different than the one you are talking about.