silver70
Member
8 3/4 housing, originally c-body cut down to around a-body length... can measure to get exact dimensions. Was narrowed with a jig. Moser 30 splines axles, these were b-body length, cut down to fit the housing, around 1" removed from each. They have brand new Green bearings installed with 0 miles and brand new 3" Strange 5/8" studs. Also includes moser lug nuts, most still in the packages. The axles are the older pre sticker style with me on the end. Will need spring perches located. The axles will work with a spool or sure grip.
Was in my 69 belvedere as a roller, but found some 35 spline axles and I built a dana 60 instead. Also was set on using cragar ss wheels I have an they would not fit with the 5/8 lug because the but would hut the raised center. It has been painted with por 15 style paint. No brakes, swapped them over to the dana. They can be ran with 10 or 11" drums or aftermarket disc, they are the standard brake gap.
Will add pics soon.
I have around 300 in the axles alone with new parts, plus the housing and other labor. Would sell it for 500 plus shipping.
Pm me, paypal accepted
I am near Pittsburgh Raceway Park, in Latrobe 15650, can link to feedback as I know I don't post a lot here.
Was in my 69 belvedere as a roller, but found some 35 spline axles and I built a dana 60 instead. Also was set on using cragar ss wheels I have an they would not fit with the 5/8 lug because the but would hut the raised center. It has been painted with por 15 style paint. No brakes, swapped them over to the dana. They can be ran with 10 or 11" drums or aftermarket disc, they are the standard brake gap.
Will add pics soon.
I have around 300 in the axles alone with new parts, plus the housing and other labor. Would sell it for 500 plus shipping.
Pm me, paypal accepted
I am near Pittsburgh Raceway Park, in Latrobe 15650, can link to feedback as I know I don't post a lot here.
