[SOLD] 8 3/4 Complete Rearend

[smartken22]

This is a factory 8 3/4 rearend out of my 71 Duster. It is stock length and NOT shortened. I removed the perches already because I was converting to 4 link and doing an inboard relocation. Can include them. Decided to convert to a Dana 60 instead halfway through the build. Specs listed below. So this is going to be a tough one as I have no idea how to ship this. Talking with one of my friends on here that lives locally, I can ship store to store on a pallet with Fastenal. We have one locally here so if you have one, that is the easiest way. I am in Central Cali and will leave it over to the buyer to figure out the shipping costs. I can deliver within a reasonable distance locally. $1150 obo plus the ride.

Specs:
- Dr. Diff big bolt 5x4 1.2" pattern 30 spline axles (little over 1000mi on them)
- Fresh rebuild on a 489 case with 323 gears and crush sleeve eliminator kit (little over 1000mi)
- Clutch style sure grip with new Dr Diff Powr-Lok clutches/internals
- 7290 U-Bolt 10 spline Pinion Yoke Package
- New case gasket
- New hard brake lines and rubber brake line.
- Brakes are NOT included.

 

[cuda620]

Are the backing plates included? Did fastenal quote you on shipping? I have a local store at 46017.

 

[smartken22]

Are the backing plates included? Did fastenal quote you on shipping? I have a local store at 46017.

I have not asked them for a quote. Backing plates and brakes are not included. Everything else is.

 

[smartken22]

I will post some recent pics tomorrow of everything as it will be shipped/delivered. Some of the housing pics were taken when I was restoring the car. Nothing has changed other than the removal of the leaf perches and some cleaned up weld castings. Axle housing will need either a new coat of paint or powdercoating.

 

[smartken22]

Here are the recent pics for you all. Will come with all new mounting hardware for axles and third member as well.

 

[cuda620]

No perches? Gotta get some and weld them on plus locate brakes, correct. Plus shipping? Looks nice though.

 

[smartken22]

No perches? Gotta get some and weld them on plus locate brakes, correct. Plus shipping? Looks nice though.

I will include the perches that I took off. Nothing wrong with them. Brakes are not included as I am using them on my Dana 60. Shipping cost is not included. Locally, will deliver to a reasonable area or meet half way.

 

[cuda620]

I'm in Indiana. Half ways still a long way. Fastenal would be best. I'll check shipping. May be too much anyway. Pm sent.

 

[smartken22]

Sold, thanks FABO!