1. moparwedden

    moparwedden Well-Known Member

    Messages:
    797
    Likes Received:
    11
    Joined:
    Apr 13, 2006
    Location:
    trenton,ontario,canada
    Local Time:
    6:59 AM
    OK here is the problem, put in gear, drive shaft turns but will not move car under load. New 727 tranny, rear end just put together ,not by me. Axcels are the right length and housing is too. lift car up and tires will turn, is there something wrong with the third member?
     
  2. Oklacarcollecto

    Oklacarcollecto Life is an experiment

    Messages:
    17,292
    Likes Received:
    285
    Joined:
    Mar 13, 2009
    Location:
    North Central Oklahoma
    Local Time:
    5:59 AM
    Does the drive shaft increase speed under the load. If so you have a rearend problem if not there is a problem on the tranny side. Need some more details and conditions here to give much help. Tires on ground or in the air. Just give us all of what you have. Could be some as simple as the yoke isn't going all the way in to the transmission.
     
  3. moparwedden

    moparwedden Well-Known Member

    Messages:
    797
    Likes Received:
    11
    Joined:
    Apr 13, 2006
    Location:
    trenton,ontario,canada
    Local Time:
    6:59 AM
    The tranny is new yoke goes in all the way then pulled out 1 inch. It turns with tires on the ground but will not move, I have the axcels out and third member out, might just have to take it in.
     
  4. Snake

    Snake Mopar Nut

    Messages:
    9,289
    Likes Received:
    267
    Joined:
    May 22, 2006
    Location:
    Belleville Canada
    Local Time:
    5:59 AM
    I bet if you jack it up again drop in gear and grab a turning tire you will be able to stop it,sounds bad in that 3rd,dam.
     
  5. fishy68

    fishy68 Tyr Fryr's Inc. FABO Gold Member

    Messages:
    16,909
    Likes Received:
    901
    Joined:
    Jan 11, 2005
    Location:
    Central, IL (Hooterville)
    Local Time:
    5:59 AM
    Gotta be a rearend problem if the driveshaft turns but the car doesn't move.
     
  6. mullinax95

    mullinax95 Well-Known Member

    Messages:
    11,551
    Likes Received:
    393
    Joined:
    Oct 25, 2006
    Location:
    Anderson, SC
    Local Time:
    6:59 AM
    I agree with fishy on this one. Any noises that doesn't sound healthy?
     
  7. jw133489

    jw133489 Well-Known Member

    Messages:
    237
    Likes Received:
    17
    Joined:
    Dec 1, 2009
    Location:
    Central Texas
    Local Time:
    5:59 AM
    sounds like the pumpkin...
     
  8. daredevil

    daredevil Well-Known Member

    Messages:
    11,462
    Likes Received:
    147
    Joined:
    May 19, 2007
    Location:
    S/w Houston
    Local Time:
    5:59 AM
    broken pinion or ring gear
     
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.