I'm getting ready to put this in my 67 Barracuda coupe.
I have a 416 stroker to go in it and this will be a lot better than the 7 1/4 that it came with.
I found the rear at my local pull a part for abt $50! Complete! drum to drum.
I cleaned it up, had a local shop install new bearings on the axels and new seals in the housing.
It came off of a 65 Dodge Coronet w/318 poly. It has 3.23 gears, 489 center.
I have a 416 stroker to go in it and this will be a lot better than the 7 1/4 that it came with.
I found the rear at my local pull a part for abt $50! Complete! drum to drum.
I cleaned it up, had a local shop install new bearings on the axels and new seals in the housing.
It came off of a 65 Dodge Coronet w/318 poly. It has 3.23 gears, 489 center.
