[SOLD] 8 3/4 shock plates

[4spdragtop]

Hi all, heres a pair of plates I dug up. Bolts arent included. $80 US plus shipping. I'll blast and prime them too.
Plus the ride from K0L2H0
Thanks
Steve

 

[Enjoying it again]

sending you a PM

 

[bb66cuda]

Those look like 7 1/4 plates, not 8 3/4.

 

[4spdragtop]

3" Ubolts

Those look like 7 1/4 plates, not 8 3/4.

 

[4spdragtop]

I'll throw a measure on them and double chk.
Sale pending also.

Those look like 7 1/4 plates, not 8 3/4.

 

[4spdragtop]

Heres more pics. I believe 8 3/4"?
Just wanting to confirm.
Shock studs are 1/2" fine. Ubolts(I'm keeping) are 7/16" fine. Ubolts are 3" center to center.
Thanks
Steve

Those look like 7 1/4 plates, not 8 3/4.

 

[4spdragtop]

Can u send me a pm with address for ship quote? I lost all pm's.
Thanks
Steve

sending you a PM

 

[SGBARRACUDA]

You are measuring the wrong spread. Measure the other direction. I think those are 7 1/4”.

 

[4spdragtop]

Looks to be 3" both ways?

You are measuring the wrong spread. Measure the other direction. I think those are 7 1/4”.

 

[bb66cuda]

Those are 7 1/4. 3” is tube size for 8 3/4 so those are too small.

 

[SGBARRACUDA]

They have been drilled out. The pattern of the shock plate is that of a 7 1/4”.

 

[SGBARRACUDA]

This is the design of the 8 3/4” plate.

 

[go-fish]

View attachment 1715738907

View attachment 1715738906

Are 8-1/4 and 8-3/4 rears the compatible or is 8-1/4 compatible 7-1/4”?

 

[bb66cuda]

Are 8-1/4 and 8-3/4 rears the compatible or is 8-1/4 compatible 7-1/4”?

8 1/4 and 8 3/4 are the same.

 

[RustyRatRod]

Steve, you have to measure the inside width. Not center to center. The 8 3/4 axle tube is 3" in diameter. That means the inside width of the U bolts has to be 3", not the center to center width. Those won't work for the 8 3/4".

 

[4spdragtop]

Ok marking sold and was in touch with potential buyer letting him know what these are. Free for shipping now. Guaranteed at least $20-25 to ship.
@Enjoying it again