[SOLD] 8.75 housing and axles

[rmchrgr]

Up for sale is an 8.75 rear housing and small bolt pattern axles. Housing is blasted clean and is in very nice shape. New perches welded on. Axles are in usable shape, bearings and adjusters are good. If you buy for my asking price, I will include a pair of 10" backing plates that have been blasted and primed.

Asking $400 for all.

Parts located in Huntington, NY 11743.

PM with questions.

 

[rmchrgr]

Bump

 

[BB-Dave]

Why new perches weld on? What year is this out of(where is the breather hole)?

 

[rmchrgr]

Why new perches weld on?

Not sure, bought it this way a few years ago. They are in the factory position as shown in the pic.

I've actually done this myself to a different housing because the original ones were chewed up. The reason I did it was because I did not feel 100% secure putting any sort of load on questionable parts.

The welds look good on this one so I was not concerned with the integrity of these perches.

What year is this out of

Not sure but all A body rear ends will interchange.

(where is the breather hole)?

On the left. Can't really see it in the pic because it's facing forward.

 

[rmchrgr]

Nice rear.

 

[rmchrgr]

Still available, come 'n git it!

 

[rmchrgr]

Bump!

 

[rmchrgr]

Delivery to Carlisle if prepaid beforehand! Save on shipping!

 

[340duster340]

I am in deer park...do you have any leaf springs? building a 66 dart if you have anything I could use.

 

[rmchrgr]

I am in deer park...do you have any leaf springs? building a 66 dart if you have anything I could use.

Mike, I may have some things you could use but no leaf springs right now, just the rear. PM with any questions.

 

[rmchrgr]

Bump. Again, delivery to Carlisle - save on shipping! :thumbup:

 

[cchrishefish]

I think the large bolt pattern is the way to go. I eventually want to convert my /6 to a crate 408.

 

[rmchrgr]

I think the large bolt pattern is the way to go. I eventually want to convert my /6 to a crate 408.

:scratch:

Anyway... as of 7/12/12, the axles have been sold. Axles only.

Housing and backing plates are still available as of 7/14/12.

This is a clean housing gang, snap this one up.

 

[rmchrgr]

Housing and backing plates sold as of 7/15/12. Thanks Joe!