moparisbest
Well-Known Member
Can someone help me out ? With a stock 8.75 can someone set the perches level on your bench and tell me what the pinion angle is
8.75 measurements needed
- Thread starter moparisbest
- Start date
-
are you trying to recreate an A body 8.75?
If so, with perches level, the pumpkin mount face will be 5* up. That's the factory setting
If so, with perches level, the pumpkin mount face will be 5* up. That's the factory setting
moparisbest
Well-Known Member
Yes that what I'm doing . putting the perches back on after cutting the old one off . I didn't measure before cutting the old ones off so putting back stock will be ideal . Thanks rob ?
-
