[SOLD] 8.75 truck housing

[Dustert73]

Hey everyone, I have a 8.75 housing which I believe came from a truck. It measures 40 7/8 between the inside of the spring perches. It comes with axles which I believe are tapered, 11 in backing plates and drums. All these parts appear to be in pretty good shape aside from the scratches/dings where the center section goes (included in pics). And the drums will probably need to be replaced.

Asking 100$. I'm willing to ship if you help me set it up, I've never shipped anything like this. I'm assuming it's going to be pricey. Located in 43023, I'm willing to meet near there as well. Thanks for looking!

 

[Dustert73]

Pics

 

[Rapid Robert]

Pics

View attachment 1714960056

View attachment 1714960057

View attachment 1714960058

Edited by staff:
Negotiate through private conversation.

 

[Dustert73]

Edited by staff:
Negotiate through private conversation.

I'll pm you

 

[Dustert73]

splines

 

[Deleted member 38666]

I am in NW Iowa, would be interested. Could you look into shipping to 51360? Thanks. PM me at Old Dart 66

 

[Deleted member 38666]

splines

View attachment 1714962171

Hey Dustert, I tried to PM, but your mailbox is full. Thanks, and when you get back to me, could you post a photo of the ends of the axles....the direct end, and about a foot from the end on the taper. Thanks. Old Dart 66

 

[JDMopar]

What is the wheel bolt pattern on the axles? Some of the later Power Wagons had 5x5 instead of 5x4 1/2. Just some FYI, because I unwittingly gave a buddy a set of old 8 3/4 truck axles to get cut and resplined. He had them done....and his wheels wouldn't fit! If they are 5x5, and Old Dart decides to pass, I would be interested in it to put in my 88 beater truck.

 

[Deleted member 38666]

What is the wheel bolt pattern on the axles? Some of the later Power Wagons had 5x5 instead of 5x4 1/2. Just some FYI, because I unwittingly gave a buddy a set of old 8 3/4 truck axles to get cut and resplined. He had them done....and his wheels wouldn't fit! If they are 5x5, and Old Dart decides to pass, I would be interested in it to put in my 88 beater truck.

Hello JDMopar, yes, I am having an interest on the parts that Dustert73 has posted. His mailbox is full, and he has, of yet, not responded. I am interested in the axles and the other brake parts, if the axles are not tapered, and if they have the Large Bolt Pattern.....the 5 x 4-1/2. We will stay in touch. Thanks, and I will let you know or Dustert can let you know once we see what he has. Best, and Thanks. Old Dart 66