915 Cylinder heads

-
Status
Not open for further replies.
31pickemup

31pickemup

Well-Known Member
Joined
Sep 30, 2009
Messages
299
Reaction score
10
Location
Ohio
Rating - 50%
1   1   0
Contact seller
Hello All
Im looking for a set of 1967 915 cylinder heads. I'd like the 1.74 magnum head but the 1.60 heads are fine too. Ill just have to get them cut. Im located near Cleveland so if anybody close by has any that would be great!

Adam
 
I have a set that are the HP heads. They are ported with stainless steel valves and roller springs. On a 11.0 to 1 440 in my 74 Challenger it ran 10.50 at Gainesville. Less than 5 passes on heads. Went to a 505 with Indy heads. $650.00 plus shipping. I also have a set of nice bare castings that are blasted, not sure if they are HP or not but they have not been ported $400.00 plus shipping. I also have a set of ported 906 heads still in the bags from the machine shop, set up for a hydraulic flat tappet cam $500.00 plus shipping.
 
I have ONE very nice buildable head. it is the 67 casting 915 1.74 exhaust valve head. I will take 150 for it plus shipping. I am in Georgia.
 
Status
Not open for further replies.
-

Back
Top