A Body 8.75 Rear End

-
Status
Not open for further replies.
A

aimplus

Member
Joined
Jul 28, 2008
Messages
20
Reaction score
0
Rating - 0%
0   0   0
Contact seller
Need an 8.75 rear end to go into a 72 Demon. Needs to be big bolt pattern. Pristine not required, rebuildable is fine. Contact me with the specs/gear ratios you have.

I am in Arizona so will work out shipping when we make a deal.
 
You realize that a BBP 8.75 A body rear will likely have aftermarket/resplined axles in it.

I have an A body rear with SBP complete with brakes.

Have a set of BBP yukon A body axles. Might have some BBP brakes.

Got 3.91, 3.23 and 3.55 sure grip pumpkins.

The 8.75 a body rears aren't cheap, housings alone go for in the 275-300 range out here. Add in the special stuff that you want which isn't normally on them and it adds up quickly.
 
The conversion kit I am looking at will run about $1300. If I can get a rear end with all this already done, I'll seriously entertain the thought.

Since I want this car to have some balls, but still be a good daily driver I thought the 3.23 gears would suffice.

What are you asking for your set-up? If you don't want this to go over the chat then e-mail me at [email protected]
 
Sent you an e-mail.

I may be able to deliver it to west side Phoenix, no charge.
 
I have a 8-3/4 complete, drum to drum, for an A-body. I'm in Denver. Do you want more details? I'll go unbury it at Storquest.
Jim
 
I'm interested to here what you have. Give me the details.

Thanks
 
Status
Not open for further replies.
-

Back
Top