69MOPE
Well-Known Member
Saw this on face book. MUST BE PICKED UP . Lafayette Minnesota.
$400
Chad Hoffmann
dana 60
FREE
Lafayette, MN
Narrowed Dana 60, 35 spline strange axles, strange spool, drum brakes, half inch studs, axles have 4.5 inch bolt pattern and 4.75 inch bolt pattern drilled and tapped, has chassis engineering ladder bar brackets welded on, 5.14 gears, I also have a set of 5.86 gears that go with it. This was in my 69 Barracuda, I did a 9 inch for it so I don't need this thing laying around, it is extremely narrow, I believe it's 38 inches from drum to drum, I will Measure drum to drum width and ladder bar width and take some pictures when I get home tonight. I don't want to mess with shipping this thing because it's extremely heavy, first person to come and pick it up and make me a lowball offer is going to get a cheap rear end. I am in Lafayette Minnesota,
$400
Chad Hoffmann
dana 60
FREE
Lafayette, MN
Narrowed Dana 60, 35 spline strange axles, strange spool, drum brakes, half inch studs, axles have 4.5 inch bolt pattern and 4.75 inch bolt pattern drilled and tapped, has chassis engineering ladder bar brackets welded on, 5.14 gears, I also have a set of 5.86 gears that go with it. This was in my 69 Barracuda, I did a 9 inch for it so I don't need this thing laying around, it is extremely narrow, I believe it's 38 inches from drum to drum, I will Measure drum to drum width and ladder bar width and take some pictures when I get home tonight. I don't want to mess with shipping this thing because it's extremely heavy, first person to come and pick it up and make me a lowball offer is going to get a cheap rear end. I am in Lafayette Minnesota,
Last edited:
