A-body Disc brakes

-
The rear end is likely to be a 7 1/4 unless it was a prformance model or had some heavy duty options. The 73 Dart I used for the disk brak parts was a 318 car and still had the 7 1/4. But even if it has the 7 1/4 it will be the larger bolt pattern which will match the disk brakes up front.
 
He just checked the rear for me, and from what he says "counted 10 bolts on the rear cover and they were symetrical" and from what I know, that is an 8 1/4 correct?
 
I think the 7-1/4 only has nine bolts on the inspection plate , and the 8-1/4 has ten. I may be wrong on this though. Good luck!
 
You must log in or register to reply here.
-

Back
Top