A-body Rallye dash wiring harness compatibility

[matt030305]

Hey all, I’m in need of a new dash harness for my rallye dash 71 duster. I was wondering what were the differences in strictly the main harness that connects to the bulkhead from 67-71 (67-69 Barracuda harness and 70-71 340 cars). I found a good price from a 68 barracuda dash harness and wanted to verify the fit in my car (I don’t mind making tiny tweaks). Thanks!

 

[Oldmanmopar]

It won't work the barracudas have a dash ignition and flasher

 

[4spdragtop]

I had all 3 years 67-9 barracuda harness and they all had minor differences. I made my 67 barracuda harness. Tedious but worth it.
Yours will be different due to ign switch location, hazard switch etc. Get a FACTORY schematic and compare.

 

[Oldmanmopar]

What is the harness costing?

 

[Oldmanmopar]

Did you know there are three wires you need to change to use your standard harness. Move the brake light and left turn signal . Then extend the dash light. That is it. You just need the three prong plug with pig tail to do it. The rest plugs right in

 

[matt030305]

What is the harness costing?

$100 for a very good condition harness. Trying to cut costs since a brand new correct harness is $700

 

[matt030305]

Did you know there are three wires you need to change to use your standard harness. Move the brake light and left turn signal . Then extend the dash light. That is it. You just need the three prong plug with pig tail to do it. The rest plugs right in

Where can I find the correct connectors? Very oddball part.

 

[matt030305]

I had all 3 years 67-9 barracuda harness and they all had minor differences. I made my 67 barracuda harness. Tedious but worth it.
Yours will be different due to ign switch location, hazard switch etc. Get a FACTORY schematic and compare.

Will do, I’ll hit the books when I have time

 

[matt030305]

I’m going to spring Carlisle, so if anyone has a usable 70-71 rallye harness or the pigtails/connectors to convert a standard harness, please bring it and I’ll meet you!

 

[Oldmanmopar]

I have harnesses to sell and complete dashes which I won't part out. for 70-71 340 Dart. Duster Demon. Its suppose to warm up this week and I have a parts list for other members to look for.

I'll look and pull them out at that time but I know I have them. No promises what day. Where are you in NY . I am in NE Pa. You could drive here. Due to my age I avoid the ladder and cold as much as possible. Getting old sucks..

 

[CFD244]

I've got one out of a 1970 in the "pile" in unknown condition. PM if you want me to dig it out and have a look.

 

[matt030305]

PM sent to both of you guys