SSing
Well-Known Member
I have a few, not so easy to find parts that would look good even on a factory car.
$950.00 for the Shifter handle assembly and reverse Loc-out.
They go together or in case handle go first
$800 for the handle and $150 for the Loc-out.
Shifter handle is correct for a ´68 SS Hemi 4-speed and so is the Loc-out handle, although handle has been shortend some.
Shifter handle has never been in a Shifter mechanism after chrome plating. The Reverse Loc-out is a used part.
$435.00 for the Hemi K-member weld on brackets.
These are a very good copy of early B-Body Hemi K-member Brackets. I have made these.
$250.00 for the Heater Delete Plate. Used but looks very nice.
Note this is for a 1967 Barracuda and is slightly thicker. Needs to have some shaved off, to look good on a ´68.
$295.00 for the Hurst Roll Control. Says 1969 on the instructions so would be ok for a SS/B recreation.
$50.00 for the Exhaust Pipe Hangers. Set of two. I have made these.
$25.00 NOTICE disclamer sticker. Very good copy of the original sticker. I have made this.
25% off of all these parts would be $1500.00 including shipping from Sweden.
Thank you.
$950.00 for the Shifter handle assembly and reverse Loc-out.
They go together or in case handle go first
$800 for the handle and $150 for the Loc-out.
Shifter handle is correct for a ´68 SS Hemi 4-speed and so is the Loc-out handle, although handle has been shortend some.
Shifter handle has never been in a Shifter mechanism after chrome plating. The Reverse Loc-out is a used part.
$435.00 for the Hemi K-member weld on brackets.
These are a very good copy of early B-Body Hemi K-member Brackets. I have made these.
$250.00 for the Heater Delete Plate. Used but looks very nice.
Note this is for a 1967 Barracuda and is slightly thicker. Needs to have some shaved off, to look good on a ´68.
$295.00 for the Hurst Roll Control. Says 1969 on the instructions so would be ok for a SS/B recreation.
$50.00 for the Exhaust Pipe Hangers. Set of two. I have made these.
$25.00 NOTICE disclamer sticker. Very good copy of the original sticker. I have made this.
25% off of all these parts would be $1500.00 including shipping from Sweden.
Thank you.
Last edited:
