A833 Shifter Linkage Bushings

[64drtGt]

Is there anywhere that sells a kit to rebush one of these? I don't want a really sloppy shifter when I finally get my ride put together.

 

[jos51700]

Unless you're talking about the washers, I've never seen bushings on the shift linkage. It's all hardened.

 

[64drtGt]

Would it be the washers that allow side to side play in gear?

 

[dano]

If it's a Hurst, you can send it in and have it rebuilt.

 

[64drtGt]

Yeah its a hurst I didn't know that how much does it run to have that done?

 

[dano]

Yeah its a hurst I didn't know that how much does it run to have that done?

http://www.hurst-shifters.com/?page_id=17

$165, but it says all but OEM.....I'd call them. Might check Brewers or Passion Performance, they may rebuild them as well.

 

[gliderider06]

I bought stainless bushings from Brewers to fix the slop in my levers. Put them in a drill press to drill them out for the bushings. Pressed and tacked them in place. Much better than what is was. My levers were egg shaped.

 

[RichardJ916]

http://chucker54.stores.yahoo.net/shbucl.html

I got mine from them, rebult linkage myself.