[SOLD] Accel Dual Point Tack Drive HP Distributor for B engine

[GTX JOHN]

Here is a Accel Tach Drive Distributor.

It is the HP Race Version Dual Point.

It fits 350/361/383/400 Mopar Engines.

Everything looks to be in good shape to me.

Shaft and bearings are tight and no issues with
anything I can see on it whatsoever.

It is absolute pristine inside stored with cap and rotor in place but
40+ years sitting in a machine shop has got the outside
dirty.

However, It is from the parts from my friend who pass away
and not something of mine that I have tested or used myself.

Therefore, it is at a discounted price

$95.00

$16.
Shipping insurance

 

[1WildRT]

John
Is that the one that uses a top bearing support and GM externally adjustable Points?

 

[GTX JOHN]

Yes, Indeed it is exactly what this one is!

Boy is it easier to work with than the darn screws in the way
you adjust the Factory dual points. Eventually, after a while
I end up striping the plate from tightening down the points
over and over to get the adjustment correct on the gaps.

It is a way better setup than the Mopar distributor and the
bearings never seem to wear out and need to be replaced!
These are ALL I ran on the race cars in the old days.

 

[Desoto291hemi]

Hi John
I sent you a message this morning asking if you still have it
Let me know

Tommy

 

[Desoto291hemi]

I’ll take it

Tommy