adjustable upper control arms

[Robbie2734]

:-| I've re-built the front suspension on my 67 form s and used a 74 disk brake set-up. It came out beautiful. The car has a little wander as I drive down the road. I want to know if anyone has used the new tubeular adjustable upper control arms, how did they work out???

 

[lenweiler]

Once they were setup.......... straight as an arrow.

 

[Robbie2734]

:thumbup: One done, On to the drivers side. The front shaft is close to the mounting tab. It just misses, I might have to trim a little.

 

[AdamR]

Nice, they are on my list of thing to get.

 

[redfastback]

looks good but....your cam bolts are in backwards. nuts to the outside.

 

[10secondart]

The arms are from CAP Auto Products... (me) We also offer tubular K frames at a reasonable cost! Check out our site at www.capatoproducts.com

email me direct at [email protected]


Thanks

Ray

 

[flyboy01]

Nice, they are on my list of thing to get.

List? I got a long one of those too, its just that my bill list is longer than my want list.

 

[Robbie2734]

looks good but....your cam bolts are in backwards. nuts to the outside.

The alignment shop told me the old control arm bolts were backwards...so I reversed these. What the heck, if it works and the alignment guy is happy I'll live with it. The old arms are from a 74 and have been in about a year. I converted to disks and wanted better handling. The tubular arms were suggested by the guys at the front end shop.

 

[lenweiler]

I reversed mine also, since the nut ran interferrance with the fenderwell hedders. NO problems.

 

[AdamR]

List? I got a long one of those too, its just that my bill list is longer than my want list.

LOL, I got the same problem.