Here's a few pictures of a 70 Swinger that I installed new AMD quarter skins on. Also used AMD trunk floor extensions. The AMD panels were straight, and heavy gauge, and fit very well. The top seam was butt welded.
Thee skins needed a bit of slight hammer and dolly work to fit to the pot metal rear quarter extension, but otherwise, were fantastic. You can see that in the one photo. Door gap was excellent too. No body filler was needed on the quarter surface at all. Just where the weld joints were.
Highly recommended.
Thee skins needed a bit of slight hammer and dolly work to fit to the pot metal rear quarter extension, but otherwise, were fantastic. You can see that in the one photo. Door gap was excellent too. No body filler was needed on the quarter surface at all. Just where the weld joints were.
Highly recommended.
