That overflow canister isn't going anywhere, that's for sure ...
I concur. Alu is crap for the banjo application.If those are straight threads with "banjo" fittings on that Wilwood stuff, do not use the supplied aluminum crush washers. They will always leak. Get the appropriate sized dead-soft copper crush washers, and you won't have leaks. I fought a leaky Willwood M/C all last summer, and their junky washers were the problem.
That overflow canister isn't going anywhere, that's for sure ...
If those are straight threads with "banjo" fittings on that Wilwood stuff, do not use the supplied aluminum crush washers. They will always leak. Get the appropriate sized dead-soft copper crush washers, and you won't have leaks. I fought a leaky Willwood M/C all last summer, and their junky washers were the problem.
I concur. Alu is crap for the banjo application.
Cuda repair, now we are talking! Next time you start it, capture some audio or video and post it, I need some motivation.
John, can you tell me where you got the bracket to hold the master? thanks.
To say the least, John..... Thanks for the pictures, of the Mopar show... That orange Road Runner, tickled my fancy. Good to see you post. Got the proper trans dipstick, for the 727.... Turned into the usual 3 hour debacle.... Next step, alignment....A guy that lives about 15 miles away just bought this Charger from a farmer for $50. It's rough but you can't deny it was a heck of a bargain.
View attachment 1715047920
To say the least, John..... Thanks for the pictures, of the Mopar show... That orange Road Runner, tickled my fancy. Good to see you post. Got the proper trans dipstick, for the 727.... Turned into the usual 3 hour debacle.... Next step, alignment....
It didn't fit, my o.e.m. standard..., to be honest.I was never happy, about it.. It' s nonfunctional, for the price....I often find that the small detail items can take up as much time as the major ones. What was it that you didn't like about the Lokar dipstick? I've never had one but I can't say I wouldn't ever consider getting one if it fit my needs.
It didn't fit, my o.e.m. standard..., to be honest.I was never happy, about it.. It' s nonfunctional, for the price....
Perfection! For once, an aftermarket part kicks ***.... Lokar dipstick, well....no comments.lol....Bellissimo.....Did it fail to fit (and seal) into the transmission? - Or was the problem on the other end? Length OK? Curious minds want to know!
Lots of neat mopars. But I never will understand why a person would go buy a new car, and put it in a car show, yeah, right , they really did something ! Any body w/ a job can do that ! I didn`t even look at them when I was a judge in a show, ' WHICH I`LL NEVER DO AGAIN !":Fifty bucks ...
Fifty bucks ...