Another Super Six Question

-
pacuda59

pacuda59

pacuda59
Joined
Sep 20, 2005
Messages
5,790
Reaction score
813
Location
Pennsylvania
I'm going back to Englers junkyard today in NE PA. Last year I pulled a super six off of a Volare wagon. I neglected to pull the flange that is attached to the transmission that the linkage connects to. I understand that it's a different size than the one on the older trannys.

Question...was the super six an option or standard on the late seventies Volares/Aspens? And if so, would the flange on single barrel Volare/Aspen be the same size as the two barrel super six?
 
Success!
Just returned from Englers with the flange/bracket that is attached to the transmission for the Super Six linkage. Picked it off of an Aspen Wagon. In fact, there is a Volare sedan with the bracket if anyone needs one.
 
How about doing me a favor? Measure from the center line of the valve body shaft hole to the center line of the hole where the linkage hooks up without bending the tape measure?
 
You must log in or register to reply here.
-

Back
Top