Anyone running 15x10s on the back of a stock duster??

[7DUSTER3]

Im looking at buying a new set of rims for my duster and would like to squeeze the biggest tire i can in the back. I currently have 15x7's and the cragars i want come in 7,8,10. I have SS springs and the cars not tubbed.I want to know if 15x10's stick out that much and if it looked funny.


Pictures or thoughts are welcomed!!!

 

[7DUSTER3]

Im looking at these rims to get my by for the time being:

http://www.summitracing.com/parts/CRR-3655112/

 

[Plumcrazyfreak]

I'm running 10 x 15 Cragars with 5.5 BS. SS Springs are moved in 3/4" with offset hangers. Goodyear Eagles SS DOT 325/50/15
See my gallery for more pictures. Hopefully this helps.

 

[1968FormulaS340]

I'm running 10 x 15 Cragars with 5.5 BS. SS Springs are moved in 3/4" with offset hangers. Goodyear Eagles SS DOT 325/50/15
See my gallery for more pictures. Hopefully this helps.

Looks like the wheel/tire stick outside the body.

 

[Plumcrazyfreak]

Your correct, The tread portion is aprox 1" inside the top of wheel well with the sidewall is aprox 1" outside the top of wheel well. There is no rubbing.
Tread is 11.5 & side wall width is 13.50 This is a 28" tire with aprox 3/4" space between the front of tire & wheel well edge. Some guys have moved the axle back 1" to center the front to back of the tire to the well.