I have a used ARP stud kit for the Edelbrock RPM LA engine cylinder heads. I used these On a 340 with the Edelbrock heads. i am changing direction and have theses parts left over.
Two of the studs are actually long bolts with a slightly smaller diameter to use on the head location that has the oil feed coming up from the deck and feeds the pedestal that oils the rocker shaft.
You will receive 18 studs and nuts, two long bolts and 20 hardened washers as shown in the pictures.
Price is $90 shipped in the lower 48 states.
Two of the studs are actually long bolts with a slightly smaller diameter to use on the head location that has the oil feed coming up from the deck and feeds the pedestal that oils the rocker shaft.
You will receive 18 studs and nuts, two long bolts and 20 hardened washers as shown in the pictures.
Price is $90 shipped in the lower 48 states.
