69MOPE
Well-Known Member
What is the O.D. of the axle register on Mopar large bolt pattern axles? 1970 8 3/4.
Axle register size?
- Thread starter 69MOPE
- Start date
-
Oklacarcollecto
Life is an experiment
Huh? Splain.
Robbie2734
Lambcharger
The register is the center hub on the axle, the wheel has a matching hole to center it on the axle. I think they are all the same.
69MOPE
Well-Known Member
I am trying to put a ford rotor on and the center hole is to small, won't fit over the register, so they all can not be the same. I can not get a mic in against the flange. I was hoping someone knew the measurement so I could research a rotor that would fit without modifying.
76 WARLOCK
Member
Look in Condran's book he clearly explains the difference between ford and mopar.
Fords had smaller registers than Mopars. If no one comes up with it, I'll stick a dial caliper to an axle I have up in the rafters....but my axle will be for the larger bolt pattern on a B body if that makes a difference. I think the older A's are smaller.
-
