Backing Plates Needed

[DUSTERB'D]

Swapped axles in my Duster, upgraded to 2.5" drums and shoes as that was all that NAPA showed with big bolt pattern, now I need the proper backing plates, the brakes are 10" by 2.5", anybody got a set kicking around ? thanks, Mick Campbell email me at [email protected]

 

[dusterdood]

I've got a pair of small bolt circle ones I'd sell for $40, but I think you've changed to big bolt, right? I've got a set of 11" drums, and the backing plates. For $40 plus shipping they're yours, and I'll throw in a pair of shoes I bought and never used.
Mike
PS: PM me, I don't get E-mail notification anymore, but I'll see a PM.

 

[7demon2]

look here......http://stores.ebay.com/Mopar-Madness

this is a members store on ebay. he a member here and goes by john wolfe on the board

http://www.forabodiesonly.com/mopar/member.php?u=7034

he is a really nice guy that can help you out. i have bought alot of stuff off of him....

 

[larry408]

I have a pair from a '73 Dart. $30.00 plus shipping from NW Arkansas.


[email protected]

 

[DUSTERB'D]

Appreciate the replies, think I have a set coming, if it falls through I will give you a shout, thanks very much, Mick

 

[RPM]

weird.... my license plate says DUSTRBD

lol

-RPM

 

[BobsDart]

Mick,
I know when I did the axle swap, moser asked me which backing plates I was using.... If you have an oem a body rear you might have to stay with those??? Give moser a call.. I just redrilled my drums for the bolt pattern...

Bob