Ball Joint Adapters

[Cuda68Scott]

Has anybody used these adapters from Doctor Diff to convert their small ball joint uppper control arms to large ball joint? Looks like a pretty good deal if they work.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170405179303&ssPageName=STRK:MEWAX:IT

 

[cudaman51]

i cut out the sockets and welded in large sockets for a fraction of the cost. i also moved the socket in to compensate for alignment ease.cracked back tiped me of to the sockets frostock car products. worked grate.

 

[Valiant422]

Has anybody used these adapters from Doctor Diff to convert their small ball joint uppper control arms to large ball joint? Looks like a pretty good deal if they work.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170405179303&ssPageName=STRK:MEWAX:IT

don't most large ball joint upper control arms go for around that?

 

[cudaman51]

hears where i got them. http://www.stockcarproducts.com/susp7.htm .call them and tell them what your doing before you buy to make shure you get the right sockets. i used a torch to cut out the small bj sockets. i made the holes a little small and trimed them with a high speed die grinder. then i used a stick welder to weld the sockets in on the bottom side and then cut off the excess socket.

 

[Cuda68Scott]

don't most large ball joint upper control arms go for around that?

They seem to be going around $100. Somebody on FABO is selling a pair for $130. On ebay I see them going for $150.

 

[Valiant422]

I thought I saw some on here or moparts for $60

that kinda money you might as well spring for tubular ones, as they come with new bushings and ball joints