Balljoint stud receiver?? Fabrication part, need help finding it.

[DionR]

My Googlefu skills are not up to the task, can't come up with anything so far.

I am looking for a slug of steel that has the taper for the balljoint stud already machined into it. I know I can buy a reamer and do it myself, but looking for something that is pre-made to simplify my idea. The part on the spindle that the balljoint stud slips into and is tapered.

Not sure what to call it, and so far I either get spacers with a constant hole or just balljoint parts.

Anyone have any ideas where I could get something like that?

 

[Oldmanmopar]

I believe you may be looking for an adapter to use small ball joint on a large spindle. If so there are several suppliers not just ebay
View attachment 1716336430
Mopar A-Body Upper Ball Joint Tapered Adapters Dart Demon Duster | eBay

 

[DionR]

Is this what your looking for?

http://[URL]https://www.manciniracing.com/upbajostre1.html

[/URL]

Thanks, but not that.

 

[DionR]

I believe you may be looking for an adapter to use small ball joint on a large spindle. If so there are several suppliers not just ebay
View attachment 1716336430
Mopar A-Body Upper Ball Joint Tapered Adapters Dart Demon Duster | eBay

Ok, now make it about 1" in OD with the ID matching the size and taper of the big balljoint.

I am going to build a fabricated spindle and want the part the balljoint bolts into.

 

[Oldmanmopar]

Any machine shop with a precision lathe can make that.

 

[DionR]

Any machine shop with a precision lathe can make that.

Agreed, I was just hoping to buy something off the shelf instead.