Barracuda Formula S Emblem Info.....

-

66340SEDAN

FABO Member #3649
Joined
Nov 20, 2006
Messages
29,200
Reaction score
49,873
Location
Minnesota
66340SEDAN submitted a new Article:

Barracuda Formula S Emblem Info.....

Ok, some discussion about the Plymouth Barracuda emblems has had me thinking and I had to look for more info. Seems a lot of people think the 65-68 Formula-S fender emblem is the same. I remember as a kid going to the junk yard with my dad and there were a pair of Formula-S cars there, a 65 & a 66, parked side by side. Dad bought both sets of emblems off the cars to save them instead of let them rot. I later remember him saying that the one set was different than his 66, the mounting studs were in different spots, the 65 had them side-to-side while the 66 was top-to-bottom. Never thought much about this till recently. I just took these pics of the same 65 emblems we pulled of the car many years ago, part number on back is 2579442, studs to the sides. I also noticed the back side is very slightly curved which makes sense cause the fender curves on the 65 models.

The 66 emblems have part number 2579443 on them, I also included pics for comparison (the last 2 pics). Does anybody reproduce the 65 style emblem? If not, they have to be pretty hard to find. I assume 66-68 were all the same due to the flat fender area they were mounted too. Other than the slight curve on the back, part number and stud location, they look identical from the front side.

View attachment 1714974612




View attachment 1714974613



View attachment 1714974614




View attachment 1714974615



View attachment 1714974616




View attachment 1714974617




View attachment 1714974618

Read more about this article here...
 
Last edited by a moderator:
The 66 emblem mounts just ahead of the inner fender splash shield, not sure about the 65 inners but the mounting studs are different from 65 to 66
 
Some great info here :thumblef: Thank you :thumblef:
 
Ok, some discussion about the Plymouth Barracuda emblems has had me thinking and I had to look for more info. Seems a lot of people think the 65-68 Formula-S fender emblem is the same. I remember as a kid going to the junk yard with my dad and there were a pair of Formula-S cars there, a 65 & a 66, parked side by side. Dad bought both sets of emblems off the cars to save them instead of let them rot. I later remember him saying that the one set was different than his 66, the mounting studs were in different spots, the 65 had them side-to-side while the 66 was top-to-bottom. Never thought much about this till recently. I just took these pics of the same 65 emblems we pulled of the car many years ago, part number on back is 2579442, studs to the sides. I also noticed the back side is very slightly curved which makes sense cause the fender curves on the 65 models.

The 66 emblems have part number 2579443 on them, I also included pics for comparison (the last 2 pics). Does anybody reproduce the 65 style emblem? If not, they have to be pretty hard to find. I assume 66-68 were all the same due to the flat fender area they were mounted too. Other than the slight curve on the back, part number and stud location, they look identical from the front side.


this correct, great stuff
 
-
Back
Top