[WANTED] Big block aluminum heads.

[mycuda]

Looking for complete heads, bigger valves/springs. Closed or open chamber.
preferred straight plugs. Let me know what you have.
Must be ready to run.


Thanks
D.

 

[SGBARRACUDA]

I have a new set of MP StageVI Max wedge Ported heads, P5249579 , ported and built by Jim Laroy ( IQ52). But they ain't cheap. PM me if interested.

 

[mycuda]

I have a new set of MP StageVI Max wedge Ported heads, P5249579 , ported and built by Jim Laroy ( IQ52). But they ain't cheap. PM me if interested.

Not familiar with those. Does that require special intake/headers to use?

$?
Thanks D.

 

[SGBARRACUDA]

Standard intake pattern and standard exhaust thou the exhaust is raised .250 . But the ports are Max wedge size(bigger). If you serious I have pictures and flow sheet.

 

[mycuda]

Standard intake pattern and standard exhaust thou the exhaust is raised .250 . But the ports are Max wedge size(bigger). If you serious I have pictures and flow sheet.

What is effect on fenderwell headers??

D.

 

[SGBARRACUDA]

None, other than the exhaust is 1/4" higher so headers will move up 1/4"

 

[mycuda]

None, other than the exhaust is 1/4" higher so headers will move up 1/4"

my only concern would be MC.
Im 1" from lines now.

Anyhow whats the price tag b4 I dream any further??

 

[famous bob]

I have a new set of MP StageVI Max wedge Ported heads, P5249579 , ported and built by Jim Laroy ( IQ52). But they ain't cheap. PM me if interested.

so what do the max wedge heads flow ?

 

[SGBARRACUDA]

346/288 @.700 lift

 

[mprhound]

got a set of Zeeker heads (like indy - 1s except have internal oiling to rocker like stock) all they need is valve seals, have indy 1.6 rockers with them and an indy low deck intake 4500 pattern intake, would turn loose of it all for $1850 plus shipping