Big Block Pushrods 9.4 Ball/ball

-
Status
Not open for further replies.
rbdart

rbdart

Well-Known Member
Joined
Sep 23, 2008
Messages
1,459
Reaction score
53
Location
Golden City Mo
Rating - 0%
0   2   0
Contact seller
Need A Set Of Push Rods That Are 9.380-9.400 In Total Length With 5/16 Ball Ends On Both Ends, Prefer Heat Treated And Tubes Can Be 5/16-3/8 Or So As Long As 16 Pcs. Are Same.......have A Set Of Smith Bros Custom Tubes That Are 9.1875[9.2] With 5/16 Ball Ends [welded] With Heat-teated Super Thick Wall 5/16 Tube Costs 161 Bucs Plus Shp Will Sell Or Trade........need Pushrods Asap.........thanks..........ken
 
SGBARRACUDA said:
I have several sets but they are all ball/cup. What kind of rockers do you have?
Click to expand...
COMP STYLE STAINLESS 1.6 RATIO...ORDERED ROCKERS WITH CUP END ON ROCKER..HENCE THE NEED FOR BALL/BALL STYLE........STOCK 455 BUICK IS 9.378 5/16 TUBE WITH 5/16 BALL ENDS WHICH I HAVE BUT ARE STOCK,WOULD LIKE TO HAVE A LITTLE BETTER QUALITY SUCH AS THICKER,HEAT TREATED,CHROME MOLY,COMP MAKES A HI-ENERGY BUT NEED BETTER THAN THAT, SO IS WHY I ASKED TO SEE IF ANYONE HAD A SET WITHIN THESE MARGINS IN AFTERMARKET CUSTOM THAT THEY ARENT USING OR HAVE LAYING AROUND, BRAND OR APPLICATION DOESNT MATTER, TRICKFLOW HAS A SET DELIEVERED FOR $125 BUT TIMES ARE TOUGH AND I ALREADY SPENT MONEY ON PUSHRODS TWICE SO UNTIL I SELL MY OLD [NEW,NEVER USED] SMITH BROS TUBES[9.2 BALL/BALL] WILL HAVE TO FIND AN ALTERNATIVE FOR NOW....SO...5/16 BALL ENDS...9.375--9.40 LENGTH......5/16-3/8-7/16 TUBE.....OIL HOLE OR NOT.......WHAT HAVE YOU GOT???
 
rbdart said:
COMP STYLE STAINLESS 1.6 RATIO...ORDERED ROCKERS WITH CUP END ON ROCKER..HENCE THE NEED FOR BALL/BALL STYLE........STOCK 455 BUICK IS 9.378 5/16 TUBE WITH 5/16 BALL ENDS WHICH I HAVE BUT ARE STOCK,WOULD LIKE TO HAVE A LITTLE BETTER QUALITY SUCH AS THICKER,HEAT TREATED,CHROME MOLY,COMP MAKES A HI-ENERGY BUT NEED BETTER THAN THAT, SO IS WHY I ASKED TO SEE IF ANYONE HAD A SET WITHIN THESE MARGINS IN AFTERMARKET CUSTOM THAT THEY ARENT USING OR HAVE LAYING AROUND, BRAND OR APPLICATION DOESNT MATTER, TRICKFLOW HAS A SET DELIEVERED FOR $125 BUT TIMES ARE TOUGH AND I ALREADY SPENT MONEY ON PUSHRODS TWICE SO UNTIL I SELL MY OLD [NEW,NEVER USED] SMITH BROS TUBES[9.2 BALL/BALL] WILL HAVE TO FIND AN ALTERNATIVE FOR NOW....SO...5/16 BALL ENDS...9.375--9.40 LENGTH......5/16-3/8-7/16 TUBE.....OIL HOLE OR NOT.......WHAT HAVE YOU GOT???
Click to expand...

I have a set of 9.380 3/8 chrome molly but they are cup/ball
 
Status
Not open for further replies.
-

Back
Top