ValiantS
Well-Known Member
Comp Cams 892 series lifters. I have one complete set of lifters and 11 spares and will separate. They ALL have less than 10 passes BUT, I verified the condition 'good' via measurement. Purchased from 3 separate local friends who had engine failure. One set is $350 firm and I'll include the other 11 for $450 total. Otherwise $150 for the spare 11. These have .210 offset (4 right and 4 left) then 8 centered for exhaust. They have a pressurized axle oiling and will pushrod oil. I have used these in a few engines. Pic shows some of them before measurements.
Last edited:
