Block Hugger Headers

[farmer260]

Alright i posted a thread about the hedman tight tube headers but i got looking at Jegs and Summit and see they have their own block hugger headers as well as a couple other companies other than Hedman. Has anyone used these headers in an A Body?

 

[4mulaSvaliant]

Haha is there anything other than a block hugger header for an A body? LOL

but seriously I hadnt realized there were any block hugger headers.

 

[farmer260]

ok then! tight tube headers!

 

[Keith Mopar]

Headman makes a shorty header. part no. 78500 and it is available from Summit for A body's 67 - 76 I havn't used this myself and counln't find any posts showing any pics.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=HED-78500&N=700+115&autoview=sku

 

[buddyralf]

Hello again, I must be the only one that used them. I like them, but it was a challenge making the connection form the drivers side flang to the TTI H pipe. I had to use a mini starter. I also found it harder because I had a fast ration pitman arm. I bought some 2 1/2" U bends and mocked it up. These are nice because they come out form the top and you don't have to undo the motor. I had them ceramic coated.

 

[farmer260]

i think i will get them due to my budget! I also considered the Summit ones because they are much cheaper and look just like the hedman.